Universal or Double Deflection Register
PRODUCT INFORMATION
MODEL:
- DDR
- RCDDR (Rem Core)
APPLICATION:
- The front vanes are horizontal so the primary air leaving the outlet is directed above the the room occupants and does not reach the breathing zone until well mixed with the secondary room air.
- The rear vanes are vertical and are used to direct the air in a straight blow or spread the air as required by the room layout to one or both sides and still retain a near parallet air stream pattern.
FREE AREA:
- The usual settings however, are straight blow, semi divergent or fully divergent blow. the blow distance decreases with a greater air spread and the performance charts indicate three different types of blow for the normal vane settings.
- A straight blow pattern without obstructions diverges approximately 7deg each side of straight, making a total included angle of 14deg.
- A fully divergent blow spreads approximately 30deg each side making a total included angle of approximately 60deg when using a grille wide enough to attain this spread.
CONSTRUCTION:
- Frame and louvres are extruded aluminium.
- Standard frame flange is 25mm. Other flange sizes are available.
- Fixed or Removable Core.
- Single or Double Deflection
ACCESSORIES:
- OBD's
- SSD's
- Register Boxes
STANDARD FINISH:
- White Powdercoat
OPTIONAL FINISH:
- Interpon Powdercoat selection
- Anodising
